Aluminum Foil Roof Flashing Tape PVC TPO EPDM Bituminous Waterproof Membrane Roofing Waterproofing Products for Construction
Specification
PRODUCTION NAME | Roofing Waterproof Membrane | |||
USAGE/PURPOSE | Applicable to all kinds of industrial, civil buildings, structures waterproof, impervious, all kinds of underground works waterproof and non-leakage waterproofing works | |||
PERFORMANCE | Thickness (MM) : 1±10% Tensile Strength (MPa) : ≥7.5 Tear Strength（KN/m） : ≥25 Low Temperature Bending（-40℃） : flawless Water | |||
SIZE&PACKING | 1mm*1.2m*20m;1.2mm*1.2m*20m;1.5mm*1.2m*20m | |||
SHELF LIFE | 12 months in original packing. | |||
STORAGE | Stored in a dry and cool condition. | |||
Description
Aluminum Flashing tape is a butyl sealant tape with colorful aluminum and has excellent weather resistance, widely used in decorative waterproof roof. The aluminum of the surface is nice looking,easy to install. The back butyl rubber is non-solidation,permanently flexible. Excellent waterproof sealing, life time up to 20 years.
①
lt is excellent in blockingwater, air and noise
②
It never gets cured and has excellent property ofelastic deformation
③
It has excellent performance in terms of waterproofing and insulation
1.Grass-roots acceptance completed, the building node part of the strengthened layer treatment. According to the concrete conditions of the project, the full paving method, the strip paving method, the point paving method and the empty paving method can be adopted in the construction of rolling material paving.
2.When the lap joint is bonded, the lap width shall be stipulated;
3.Use solvent to clean the roll of the lap, remove dirt and grease, and then brush the adhesive. When the adhesive surface is dry,paste the lap firmly and press it with a rubber roller.
4.If you need to protect the finished product, you should first do the isolation layer on the waterproof layer, and then do the
protective layer.
